China professional factory for Hospital Oxygen Concentrator - New arrival Medical oxygen concentrator 1-8L adjustable with LED screen – yameina factory and manufacturers | Yameina

Product technical indicators:

1.The maximum recommended flow:8 L/min

2.The flow range of nominal pressure of 7kPa: 0.5-8 L/min

3.The flow rate change under the maximum recommended flow rate with the back pressure of 7kPa: smaller 1L/min

4.Oxygen concentration when the nominal pressure of the outlet is zero(the specified concentration level is reached within 30 min after the initial start-up): The oxygen concentration is 93% ± 3% at the oxygen flow rate of 8L/min.

5.The output pressure: 30-70kPa

6.Release pressure of compressor safety valve: 250 kPa ± 50 kPa.

7.Machine noise:＜60dB(A)

8.Power supply:AC230V/50Hz or AC110/60Hz or AC220V/60Hz

9.Input power:550VA

10.Net weight: about 29KG

11.Dimensions:340*345*725mm

12.Altitude: The oxygen concentration dose not reduce at 1828 meters above sea level, and the efficiency is less than 90% from 1828 meters to 4000 meters.

13.Security system.

14.Minimum working time: no less than 30 minutes

15.Electrical classification: Class II equipment, Type B application part

16.Character of service: Continuous operation

17.Normal working environment: Ambient temperature range: 10℃-40℃; Relative humidity ≤80%; Atmospheric pressure range: 860hPa – 1060hPa; Note:The equipment should be placed in normal working environment for more than four hours before use when the storage temperature is lower than 5℃.

18.Temperature of oxygen outlet ≤ 46℃.

19.Recommendation: The length of the oxygen tube should not exceed 15.2 meters and cannot be folded;

20.Ingress protection rating: IPXO

21.Device type: Non-AP/APG device (cannot be used in the presence of flammable anesthetic gas mixed with air of flammable anesthetic gas mixed with oxygen or methylene).

Specification: